ชื่อสินค้า : เครื่องดูดควันเชื่อมโลหะ FilterBox 10M

ยี่ห้อ : Nederman

รุ่น : -

Automatically cleaned for light to medium dust & fume applications. W3 tested.

The FilterBox 10A is equipped with a N24 fan for a maximum air flow capacity of 1 000 m3/h (600 CFM). An integrated silencer reduces noise from the fan and outlet air. The unit has an advanced filter control system with automatic cleaning that starts when the air flow is too low. Depending on the model, it is equipped with mechanical cleaning for dust applications or a combination of mechanical and compressed air cleaning for fumes and dust. FilterBox 10A is available either as a mobile unit on wheels or attached to a floor stand. Additional protection from harmful particles is provided if a HEPA filter is installed.

For dust applications, the unit is cleaned mechanically. For welding fumes it uses a combination of mechanical and compressed air cleaning.
For dust applications, the unit is cleaned mechanically. For welding fumes it uses a combination of mechanical and compressed air cleaning.
For welding applications, compressed air cleaning is required.
Note! FilterBox is not for use in environments where combustible dust or gases are present, and it is not for use in filtering combustible dust or gases.
- User friendly and superior filter cleaning, mechanical and/or with compressed air for long filter life
- Automatic damper preventing dust from leaking out while cleaning
- Dust free filter replacement and emptying of dust bin
- Third party approval for welding fumes category W3 according to EN 15012-1

Technical data

Airflow (m3/h)	1000
Certifications	CE
Compressed air requirement	DIN ISO 8573-1, class 5/5/4 (7 bar)
Dustbin volume (l)	15
Extraction arm diameter (mm)	160
Filter Area (m2)	13
Filter efficiency (%)	99
Installation	Indoor
Material	Casing in rotomoulded plastic
Noise level (dB(A))	66
Electric plug	Without
Filter material	Polyester PW13
Filter type	Cartridge
Number of filter elements	1